Help Center

English

Português
Español

English

Português
Español

Appearance

Target ZTE - F670L V9 ​

Introduction ​

This guide details the configuration process of the CWMP protocol (CPE WAN Management Protocol) on the ZTE F670L V9 ONT device for connection to the ACS (Auto Configuration Server) system, allowing remote management and automatic configuration of the equipment.

Prerequisites for pointing equipment ​

  • Domain CHA:http://[seudominio]/tr069
  • ACS Login: admin
  • ACS password: password informed during installation of the ACS system
  • Periodic information: 1200 seconds
  • Authentication of connection request:
  • Login: IXCSoft
  • Password: password informed during ACS installation
This information is usually provided during installation of the ACS system. Check with your service provider if necessary.

Validation of Communication ​

Before starting the configuration, ensure that there is communication between the device and the ACS server:

  1. Access the device administration interface.
  2. Locate the diagnostics section or network tools.
  3. Run a ping test for the CHA server domain.
  4. If available, make a traceroute to check the route to the server.

Step by step of the pointing ​

  1. Access the F670L v9 device administration interface - ZTE - ONT.
  2. Browse up to Internet > WAN.
  3. Select the Interface created and make sure the service INTERNET TR069 is enabled.
  4. Go to Management and Diagnosis > Management TR069.
  5. Configure the following fields:
  • WAN Connection: Select Any
  • ACS URL:http://[DOMINIODOACS]/tr069
  • User: admin
  • Password: ACS password
  • Connect request User name: IXCSoft
  • Connect Request Password: ACS password
  • Periodic Inform: Connected
  • Periodic Information Range: 1200 seconds
  1. Activate Authenticating CHA.
  2. Enable File server authentication.
  3. Save the settings.

Configuration flow in ACS ​

graph TD
    A[Acessar interface do dispositivo] --> B[Verificar TR-069 na interface WAN]
    B --> C{TR-069 habilitado?}
    C -->|Sim| D[Acessar Gestão TR069]
    C -->|Não| E[Habilitar TR-069]
    E --> D
    D --> F[Configurar ACS URL]
    F --> G[Definir credenciais]
    G --> H[Ativar Periódica Inform]
    H --> I[Configurar intervalo]
    I --> J[Ativar autenticações]
    J --> K[Salvar configurações]
    K --> L[Verificar conexão com ACS]

Final considerations ​

After configuration, the F670L v9 - ZTE - ONT device must establish automatic connection with the ACS server. Monitor device and ACS server logs to ensure proper communication. In case of connection problems, check the settings and possible firewall locks.

Read it too ​