Help Center

English

Português
Español

English

Português
Español

Appearance

Point Parks-Fiberlink 611 ​

Introduction ​

This document details the configuration process of the CWMP protocol (CPE WAN Management Protocol), also known as TR-069, on Parks' Fiberlink 611 device. CWMP is essential for remote management of network devices, allowing efficient configuration, monitoring and diagnosis.

Prerequisites for pointing equipment ​

  • Domain:http://DOMINIODOACS/tr069- Login: admin
  • Password: "Be informed during installation of the ACS system"
  • Periodic information: 1200 seconds
  • Authentication of connection request:
  1. Login: IXCSoft
  2. Password: "Be informed during installation of the ACS system"
  • Connection port: Included in the ACS URL
  • What? Connection address: /tr069
Before starting the configuration, make sure the TR-069 service is enabled on the WAN connection.

Validation of Communication ​

Diagnostic Tests Ping and Traceroute

  • Access the diagnostics section of the device
  • Run ping and traceroute tests for the ACS server domain Step by step
  1. Access the device administration interface.
  2. Browse to Net > WAN.
  3. Check that the bearer Service has the option TR069 enabled.
  4. Go to Net > TR-069.
  5. Activate Periodic Notification.
  6. Configure Periodic Notification Time Interval for 1200 seconds.
  7. In Server Domain Name/IPAddress and Port, enter:http://DOMINIODOACS/tr0698. Fill in Platform User Name with: admin
  8. Enter the Platform Password provided during installation of the ACS system.
  9. Configure Terminal User Name as: IXCSoft
  10. Enter the Password Terminal provided during installation of the ACS system.
  11. Save the settings.

Flow configuration in ACS ​

graph TD
    A[Acessar interface do dispositivo] --> B[Verificar TR-069 na WAN]
    B --> C{TR-069 habilitado?}
    C -->|Sim| D[Acessar Net > TR-069]
    C -->|Não| E[Habilitar TR-069 na WAN]
    E --> D
    D --> F[Ativar Periodic Notification]
    F --> G[Configurar intervalo de notificação]
    G --> H[Inserir URL do ACS]
    H --> I[Configurar credenciais]
    I --> J[Salvar configurações]
    J --> K[Verificar conexão com ACS]

Final considerations ​

After configuration, Parks Fiberlink 611 device must establish automatic connection with the ACS server. It is crucial to monitor the logs of the ACS device and server to ensure proper communication. In case of connection problems, check the accuracy of the inserted information and possible firewall locks. The correct configuration of the CWMP is essential for efficient device management.

Read it too ​