Bulk Parameter Change
Introduction
Bulk parameter change is a feature exclusive to technical support that allows modifying configurations on multiple devices simultaneously via the TR-069 protocol.
🔥 Management Without Mystery
ParametersParameters refer to the values that regulate the operation and characteristics of a system or device. They enable the configuration and customization of software, hardware, and service performance, ensuring they operate according to the specific requirements of the user or work environment.
Access
This functionality is exclusive for technical support use!
Change Process
graph TD
A[Client Request] --> B[Support Executes]
B --> C[Monitoring]
C --> D[Final Report]
Parameters will be sent based on the inform configured in the system; as soon as devices connect, the ACS will send the parameters. If the inform is configured for 5 minutes, this means that every 5 minutes after the device's last connection, the requested parameters will be sent.
Change Report
- Total number of affected devices
- Success/failure status
- Date and time of execution
- Technical information of the devices: model, hardware, firmware, serial number (SN), and details about which parameters were changed.
Access Restrictions
- Ensure security in changes
- Prevent mass problems
- Ensure technical validation
- Allow quick corrections if necessary
Final Considerations
Bulk parameter change is a powerful tool that requires specific technical knowledge and must be used with caution to avoid negative impacts on the network.